TLS-S500II數顯彈簧拉壓試驗機
tls-s500ii數顯彈簧拉壓試驗機
一、tls-s500ii/s1000ii雙數顯彈簧拉壓試驗機 產品簡介
a, tls-s500ii / s1000ii double digital spring tension and compression testing machine products
該產品依據jb/t7796-2005《拉壓彈簧試驗機技術條件》規定的技術要求制成。該彈簧試驗機主要用于測試各種螺旋彈簧及彈性元件的強度，即在一定的變形量(或高度)下測試彈簧的試驗力或在一定的試驗力下測定彈簧的高度或變形量。
the products based on jb / t7796-2005" spring testing machine specification provides the technical requirements.". the spring testing machine is mainly used to test a variety of helical spring and the elastic element strength, i.e. in certain amount of deformation ( or height ) under test spring test force or in certain test force measuring spring height or deformation.
二、tls-s500ii/s1000ii雙數顯彈簧拉壓試驗機 技術指標
in two, tls-s500ii / s1000ii double digital spring tension and compression testing machine technical parameters
序號 項 目 名 稱 規格參數及指標
serial item name called specification parameters and indexes
1 試驗力(n) 2000 1000 500 200 100
the 1 biggest test force ( n ) 20001000500200100
2 試驗力有效測量范圍(n) 80-2000 40-1000 20-500 8-200 4-100
2 test force effective range ( n ) 80-2000 40-1000 20-500 8-200 4-100
3 試驗力讀數值 (n) 0.1 0.1 0.1 0.01 0.01
3 test force nmm ( n ) 0.1 0.1 0.1 0.01 0.01
4 位移讀數值 0.01mm
4 the minimum displacement value 0.01mm
5 拉伸試驗兩掛鉤間距離 350mm
5 tensile tests the maximum distance between two hooks 350mm
6 壓縮試驗兩壓盤間距離 350mm
6 compression test the maximum distance between the two disc 350mm
7 拉伸與壓縮試驗行程 350mm
the 7 tension and compression tests of maximum travel of 350mm
8 壓盤直徑 ф100mm
8 plate diameter with 100mm
9 示值相對誤差 ±1%
9 relative indication error of + / - 1%
10 示值重復性相對誤差 1%
the 10 indication repeatability relative error 1%
11 回零誤差 0.1% f.n
11 return to zero error 0.1% f.n
12 變形示值誤差 (50+0.15l)µm 注:l為測定的任意位置壓盤間的距離（mm）
12 deformation value error ( 50+0.15l ) m note: l is the determination of the distance between the arbitrary position of the platen ( mm )
